Gear
Occupancy and comfort sensors for your building.
Some count people, others measure air and comfort, and a Hub sends it all to Space over the mobile network. No construction work and nothing touching your network.
Designed for IT
Easy for IT to approve.
- Stays off your network
- The Hub connects over the mobile network (LTE). No Wi-Fi, no local network: nothing to open up or review with security.
- Plug and play
- Some sensors run on batteries and others just plug into a socket. Not one extra cable. They’re set up with a phone, over NFC.
- No images
- The people sensor counts with AI inside the device. It doesn’t record or send images, and it doesn’t identify anyone.
- We keep an eye on them
- If a sensor stops sending data, we notice.
Gear
CountSensor
Counts people.
A ceiling sensor that counts people with AI, inside the device itself. It records no images: it only sends numbers.
- Up to 70 m²
- 98% accuracy
- Mains power only
- NFC setup
Gear
MultiSensor
Five measurements in one sensor.
Temperature, humidity, CO₂, light and motion. Discreet, wall-mounted, and configurable by NFC or remotely.
- Battery life up to 4 years
- Up to 1 km indoors
- LoRaWAN
Gear
MultiSensor+
Eight measurements, with air and sound.
Adds air pressure, VOC and sound to all of the above. For spaces where comfort is part of the decision.
- Battery life up to 3 years
- Up to 2 km indoors
- LoRaWAN
Gear
WellSensor
Reference-grade air quality.
The most complete sensor in the family: CO₂, VOC, particulates (PM1 to PM10), ozone, sound and more. Meets the WELL® and RESET® Air requirements.
- Battery life up to 2 years
- Up to 2 km indoors
- WELL® · RESET® Air
Gear
Hub
The bridge to Space.
Collects data from every sensor over radio and sends it to Orpheus over the mobile network (LTE). It doesn’t use your network. It restarts itself if anything fails.
- LTE mobile network
- 8 LoRaWAN channels
- Built-in antenna
Indoor conditions
Every measurement, in its sensor.
This table compares only the indoor-conditions sensors: three levels, depending on how much you want to measure. Occupancy is measured separately, by the CountSensor.
| MultiSensor | MultiSensor+ | WellSensor | |
|---|---|---|---|
| Temperature and humidity | |||
| CO₂ | |||
| Light | – | ||
| Motion | – | ||
| Air pressure | – | ||
| Sound | – | ||
| VOC | – | ||
| Fine particulates | – | – | |
| Ozone | – | – |
Gear
Meet Tablet
The door to the room.
A wall-mounted Android tablet with a coloured LED light strip around the screen, powered over the network cable (PoE). It’s the screen for Meet.
It arrives configured for Meet. If you already have open screens, we can sometimes reuse them.
See the sensors on your building’s floor plan.
We’ll explain which sensor fits each zone and how the data reaches Space.